Azure Maps Route Service (stable:2025-01-01)

2025/03/28 • 3 updated methods

Route_PostRouteDirections (updated)
Description :  The `Route Directions` API is an HTTP `POST` request that returns the ideal route between an origin and destination for automobile (driving), commercial trucks and walking routes. The route passes through a series of waypoints if specified. A waypoint is a geographical location defined by longitude and latitude that is used for navigational purposes. The route considers factors such as current traffic and the typical road speeds on the requested day of the week and time of day. The API returns the distance, estimated travel time, and a representation of the route geometry. More routing information such as an optimized waypoint order or turn by turn instructions is also available, depending on the parameters used. The Route Directions considers local laws, vehicle dimensions, cargo type, max speed, bridge and tunnel heights to calculate the truck specific routes and avoid complex maneuvers and difficult roads. Not all trucks can travel the same routes as other vehicles due to certain restrictions based on the vehicle profile or cargo type. For example, highways often have separate speed limits for trucks, some roads don't allow trucks with flammable or hazardous materials, and there can be height and weight restriction on bridges. Up to 25 waypoints and 10 viaWaypoints between any two waypoints is supported for driving and walking routes. Each set of waypoints creates a separate route Leg. ViaWaypoints define the route path and can be used for route creation through specific locations, but they don't create route Legs. Truck routes support up to 150 waypoints but don't support viaWaypoints. For information about routing availability in countries/regions, see [Azure Maps routing coverage](https://learn.microsoft.com/azure/azure-maps/routing-coverage?pivots=latest).
Reference :  Link ¶

⚶ Changes

{
  "#id": "Route_PostRouteDirections",
  "Description": {
    "new": "\n\nThe `Route Directions` API is an HTTP `POST` request that returns the ideal route between an origin and destination for automobile (driving), commercial trucks and walking routes. The route passes through a series of waypoints if specified. A waypoint is a geographical location defined by longitude and latitude that is used for navigational purposes. The route considers factors such as current traffic and the typical road speeds on the requested day of the week and time of day.\n\nThe API returns the distance, estimated travel time, and a representation of the route geometry. More routing information such as an optimized waypoint order or turn by turn instructions is also available, depending on the parameters used.\n\nThe Route Directions considers local laws, vehicle dimensions, cargo type, max speed, bridge and tunnel heights to calculate the truck specific routes and avoid complex maneuvers and difficult roads. Not all trucks can travel the same routes as other vehicles due to certain restrictions based on the vehicle profile or cargo type. For example, highways often have separate speed limits for trucks, some roads don't allow trucks with flammable or hazardous materials, and there can be height and weight restriction on bridges.\n\nUp to 25 waypoints and 10 viaWaypoints between any two waypoints is supported for driving and walking routes. Each set of waypoints creates a separate route Leg. ViaWaypoints define the route path and can be used for route creation through specific locations, but they don't create route Legs. Truck routes support up to 150 waypoints but don't support viaWaypoints.\n\nFor information about routing availability in countries/regions, see [Azure Maps routing coverage](https://learn.microsoft.com/azure/azure-maps/routing-coverage?pivots=latest).\n\n",
    "old": "\n\nThe `Route Directions` API is an HTTP `POST` request that returns the ideal route between an origin and destination for automobile (driving), commercial trucks and walking routes. The route passes through a series of waypoints if specified. A waypoint is a geographical location defined by longitude and latitude that is used for navigational purposes. The route considers factors such as current traffic and the typical road speeds on the requested day of the week and time of day.\n\nThe API returns the distance, estimated travel time, and a representation of the route geometry. More routing information such as an optimized waypoint order or turn by turn instructions is also available, depending on the parameters used.\n\nThe Route Directions considers local laws, vehicle dimensions, cargo type, max speed, bridge and tunnel heights to calculate the truck specific routes and avoid complex maneuvers and difficult roads. Not all trucks can travel the same routes as other vehicles due to certain restrictions based on the vehicle profile or cargo type. For example, highways often have separate speed limits for trucks, some roads don't allow trucks with flammable or hazardous materials, and there can be height and weight restriction on bridges.\n\nUp to 25 waypoints and 10 viaWaypoints between any two waypoints is supported for driving and walking routes. Each set of waypoints creates a separate route Leg. ViaWaypoints define the route path and can be used for route creation through specific locations, but they don't create route Legs. Truck routes support up to 150 waypoints but don't support viaWaypoints.\n\nFor information about routing availability in countries/regions, see [Azure Maps routing coverage](https://learn.microsoft.com/azure/azure-maps/routing-coverage?pivots=route-v2).\n\n"
  }
}

⚼ Request

POST:  /route/directions
{
api-version:
{
Description: Version number of Azure Maps API. ,
Required: True ,
}
string ,
x-ms-client-id:
{
Description: Specifies which account is intended for usage in conjunction with the Microsoft Entra ID security model. It represents a unique ID for the Azure Maps account and can be retrieved from the Azure Maps management plane Account API. To use Microsoft Entra ID security in Azure Maps see the following [articles](https://aka.ms/amauthdetails) for guidance. ,
Required: False ,
}
string ,
Accept-Language:
{
Description: Language in which routing results should be returned. For more information, see [Localization support in Azure Maps](https://learn.microsoft.com/azure/azure-maps/supported-languages#routing-v2-services-preview-supported-languages). ,
Required: False ,
}
string ,
routeDirectionsRequest:
{
Description: Request body of RouteDirections API in GeoJSON format. ,
Required: True ,
}
{
type:
{
Description: Specifies the `GeoJSON` type. The only supported object type is `FeatureCollection`. For more information, see [RFC 7946](https://www.rfc-editor.org/rfc/rfc7946). ,
Enum:
{
FeatureCollection: Specifies the `GeoJSON` `FeatureCollection` object type. ,
}
,
Required: True ,
}
enum ,
features:
{
Description: Driving and walking routes are defined by a set of waypoints(stops) and viaWaypoints (intermediate locations that the route must pass through). You can have a maximum of 25 waypoints, and a maximum of 10 viaWaypoints between each set of waypoints. Truck route supports up to 150 waypoints and viaWaypoints are not supported. A route must have a minimum of 2 waypoints and the start and end points of the route cannot be viaWaypoints. Both waypoint and viaWaypoint locations must be specified as a valid GeoJSON Point feature object along with pointIndex that specifies the order of the locations. For more information on the GeoJSON format, see [RFC 7946](https://www.rfc-editor.org/rfc/rfc7946). ,
Required: True ,
}
[
{
type:
{
Description: Specifies the `GeoJSON` type. The only supported object type is Feature. For more information, see [RFC 7946](https://www.rfc-editor.org/rfc/rfc7946). ,
Enum:
{
Feature: Specifies the `GeoJSON` Feature object type. ,
}
,
Required: True ,
}
enum ,
geometry:
{
Description: A valid `GeoJSON Point` geometry type. Please refer to [RFC 7946](https://tools.ietf.org/html/rfc7946#section-3.1.2) for details. ,
Required: True ,
}
object ,
properties:
{
Description: Specifies the properties of a waypoint which is a specific location or point along a route or trip that serves as a reference or stopping point. ,
Required: True ,
}
{
pointIndex:
{
Description: Identify and order the sequence of waypoints in the route. The default value is the `index value` of a features array. ,
Format: int64 ,
Required: False ,
}
integer ,
pointType:
{
Description: Waypoint type on the route. It can be a stop or an intermediate location that the route must pass through. ,
Enum:
{
waypoint: A waypoint is a specific location or point along a route or trip that serves as a reference or stopping point. ,
viaWaypoint: A viaWaypoint is a specific waypoint that must be passed through or visited along a route or trip. `Note`: Only supported for driving travelMode. ,
}
,
Required: False ,
}
enum ,
}
,
}
,
]
,
travelMode:
{
Description: The mode of travel for the requested route. If not defined, the default value is "driving" that returns the route optimized for cars. `Note`: For truck travelMode, the requested truck route may not be available for the entire route. Where the truck route is not available for a particular section, the travelMode element of the response for that section will be "other". Example: "travelMode":"driving" ,
Enum:
{
driving: The returned routes are optimized for cars. ,
truck: The returned routes are optimized for large size trucks based on the vehicle specification. ,
walking: The returned routes are optimized for pedestrians, including the use of sidewalks. ,
}
,
Required: False ,
}
enum ,
departAt:
{
Description: The date and time of departure from the origin point formatted as a `dateTime` value defined by [RFC 3339, section 5.6](https://www.rfc-editor.org/rfc/rfc3339#section-5.6). When a time zone offset is not specified, UTC will be assumed. If the `departAt` is not set, the default value is the current time. Example: "departAt": "2023-06-01T09:30:00.000-07:00" ,
Format: date-time ,
Required: False ,
}
string ,
arriveAt:
{
Description: The date and time of arrival at the destination point formatted as a `dateTime` value defined by [RFC 3339, section 5.6](https://www.rfc-editor.org/rfc/rfc3339#section-5.6). When a time zone offset is not specified, UTC will be assumed. The `arriveAt` parameter cannot be used in conjunction with `departAt`. Example: "arriveAt": "2023-06-01T09:30:00.000-07:00" ,
Format: date-time ,
Required: False ,
}
string ,
optimizeRoute:
{
Description: Specifies the parameter to use to optimize the route. If not defined, the default is "fastestWithoutTraffic" which returns the route to minimize the travel time without using current traffic information. Example: "optimizeRoute":"shortest" ,
Enum:
{
shortest: The route is calculated to minimize the distance. Traffic information is not used. ,
fastestWithoutTraffic: Finds the fastest route, without factoring in traffic information. ,
fastestAvoidClosureWithoutTraffic: The route is calculated to minimize the time and avoid road closures. No traffic information except for road closures is used in the calculation. `Note`: Only supported for driving travelMode. ,
fastestWithTraffic: The route is calculated to minimize the time using current traffic information. `Note`: Only supported for driving and truck travelMode. ,
}
,
Required: False ,
}
enum ,
optimizeWaypointOrder:
{
Description: Re-order the route waypoints using a fast heuristic algorithm to reduce the route cost specified with the optimize parameter. The origin and destination are excluded from the optimized waypoint and their position is considered fixed. Acceptable values are true or false. `Note`: Only supported for truck travelMode. ,
Required: False ,
}
boolean ,
avoid:
{
Description: Specifies restrictions that the route calculation should honor when determining the route. Avoid supports multiple values in a request and is only supported for the driving and truck travelMode. Example: "avoid": ["limitedAccessHighways", "tollRoads"] ,
Required: False ,
}
[
string ,
]
,
routeOutputOptions:
{
Description: Include the desired route information from the response. By default, the itinerary is included in the response. Supports multiple values such as "routeOutputOptions": ["routePath", "regionTravelSummary"] ,
Required: False ,
}
[
string ,
]
,
maxRouteCount:
{
Description: The maximum number of routes to return. Available for the driving and truck travel modes. For driving routes, this parameter supports routes with up to two waypoints in addition to the origin and destination and avoid parameter must not be set. Default: "maxRouteCount":1 Minimum: "maxRouteCount":1 Maximum: "maxRouteCount":3 ,
Format: int64 ,
Required: False ,
}
integer ,
heading:
{
Description: The initial directional heading of the vehicle in degrees starting at true North and continuing in clockwise direction. North is 0 degrees, east is 90 degrees, south is 180 degrees, west is 270 degrees. Possible values 0-359 ,
Format: int64 ,
Required: False ,
}
integer ,
vehicleSpec:
{
Description: Specifies the vehicle attributes such as size, weight, max speed, type of cargo, etc. for truck routing only. This helps avoid low bridge clearances, road restrictions, difficult right turns to provide the optimized truck route based on the vehicle specifications. `Note`: Only supported for truck travelMode ,
Required: False ,
}
object ,
}
,
}

⚐ Response (200)

{
$schema:
{
Description: This object is returned from a successful call. ,
}
object ,
}

⚐ Response (default)

{
$headers:
{
x-ms-error-code:
{
Description: Error code of the error that occurred. ,
}
string ,
}
,
$schema:
{
Description: Common error response for Azure Maps APIs to return error details for failed operations. ,
}
{
error:
{
Description: The error detail. ,
Required: True ,
}
{
code:
{
Description: One of a server-defined set of error codes. ,
Required: False ,
}
string ,
message:
{
Description: A human-readable representation of the error. ,
Required: False ,
}
string ,
target:
{
Description: The target of the error. ,
Required: False ,
}
string ,
details:
{
Description: An array of details about specific errors that led to this reported error. ,
Required: False ,
}
[
string ,
]
,
innererror:
{
Description: An object containing more specific information than the current object about the error. ,
Required: False ,
}
{
code:
{
Description: The error code. ,
Required: False ,
}
string ,
innererror:
{
Required: False ,
}
string ,
}
,
}
,
}
,
}
Route_PostSnapToRoads (updated)
Description :  The Snap to Roads API accepts GPS point data, represented as longitude and latitude coordinates, and generates points that aligns with existing roadways on a map. This process, known as "snapping to roads", produces a series of objects that trace a path closely following the road network. The resulting data includes road names and their respective speed limits, pertinent to the traversed segments. Moreover, the Snap to Roads API offers an interpolation feature, which refines the GPS points to create a smoother route that adheres to the road's geometry. This functionality is especially beneficial for asset tracking and enhancing data visualization in mapping applications. >[!Important] > The GPS points must be within 2.5 kilometer of each other. For information about routing availability in countries/regions, see [Azure Maps routing coverage](https://learn.microsoft.com/azure/azure-maps/routing-coverage?pivots=latest).
Reference :  Link ¶

⚶ Changes

{
  "#id": "Route_PostSnapToRoads",
  "Description": {
    "new": "The Snap to Roads API accepts GPS point data, represented as longitude and latitude coordinates, and generates points that aligns with existing roadways on a map. This process, known as \"snapping to roads\", produces a series of objects that trace a path closely following the road network. The resulting data includes road names and their respective speed limits, pertinent to the traversed segments.\n\nMoreover, the Snap to Roads API offers an interpolation feature, which refines the GPS points to create a smoother route that adheres to the road's geometry. This functionality is especially beneficial for asset tracking and enhancing data visualization in mapping applications.\n\n>[!Important]\n> The GPS points must be within 2.5 kilometer of each other.\n\n\n\nFor information about routing availability in countries/regions, see [Azure Maps routing coverage](https://learn.microsoft.com/azure/azure-maps/routing-coverage?pivots=latest).\n\n\n",
    "old": "The Snap to Roads API accepts GPS point data, represented as longitude and latitude coordinates, and generates points that aligns with existing roadways on a map. This process, known as \"snapping to roads\", produces a series of objects that trace a path closely following the road network. The resulting data includes road names and their respective speed limits, pertinent to the traversed segments.\n\nMoreover, the Snap to Roads API offers an interpolation feature, which refines the GPS points to create a smoother route that adheres to the road's geometry. This functionality is especially beneficial for asset tracking and enhancing data visualization in mapping applications.\n\n>[!Important]\n> The GPS points must be within 2.5 kilometer of each other.\n\n\n\nFor information about routing availability in countries/regions, see [Azure Maps routing coverage](https://learn.microsoft.com/azure/azure-maps/routing-coverage?pivots=route-v2).\n\n\n"
  }
}

⚼ Request

POST:  /route/snapToRoads
{
api-version:
{
Description: Version number of Azure Maps API. ,
Required: True ,
}
string ,
x-ms-client-id:
{
Description: Specifies which account is intended for usage in conjunction with the Microsoft Entra ID security model. It represents a unique ID for the Azure Maps account and can be retrieved from the Azure Maps management plane Account API. To use Microsoft Entra ID security in Azure Maps see the following [articles](https://aka.ms/amauthdetails) for guidance. ,
Required: False ,
}
string ,
Accept-Language:
{
Description: Language in which routing results should be returned. For more information, see [Localization support in Azure Maps](https://learn.microsoft.com/azure/azure-maps/supported-languages#routing-v2-services-preview-supported-languages). ,
Required: False ,
}
string ,
snapToRoadsRequest:
{
Description: Request body of SnapToRoads API in GeoJSON format. ,
Required: True ,
}
{
type:
{
Description: Specifies the `GeoJSON` type. The only supported object type is `FeatureCollection`. For more information, see [RFC 7946](https://www.rfc-editor.org/rfc/rfc7946). ,
Enum:
{
FeatureCollection: Specifies the `GeoJSON` `FeatureCollection` object type. ,
}
,
Required: True ,
}
enum ,
features:
{
Description: A set of points to snap to road network. You can have a maximum of 100 points and the two consecutive points must be within 2.5 kilometer of each other. Refer to [RFC 7946](https://www.rfc-editor.org/rfc/rfc7946) for details on the GeoJSON format. `Note`: The API will not return a point object in the response for the GPS point that cannot be snapped to a road network. ,
Required: True ,
}
[
{
type:
{
Description: Specifies the `GeoJSON` type. The only supported object type is Feature. For more information, see [RFC 7946](https://www.rfc-editor.org/rfc/rfc7946). ,
Enum:
{
Feature: Specifies the `GeoJSON` Feature object type. ,
}
,
Required: True ,
}
enum ,
geometry:
{
Description: A valid `GeoJSON Point` geometry type. Please refer to [RFC 7946](https://tools.ietf.org/html/rfc7946#section-3.1.2) for details. ,
Required: True ,
}
object ,
properties:
{
Description: The properties object is required in a valid GeoJSON but it can be empty since the metadata is not used for snapping to road. ,
Required: True ,
}
object ,
}
,
]
,
interpolate:
{
Description: Specifies whether to return additional points between the snapped points to complete the full route path that smoothly follows the road geometry. The interpolated points will have `isInterpolate:true` in the response which can be used to identify the snapped points from interpolated points. ,
Required: False ,
}
boolean ,
includeSpeedLimit:
{
Description: Specifies whether to include speed limit information for the snapped points in the response. The unit is in kilometers per hour. `Note`: Only supported for driving travelMode. ,
Required: False ,
}
boolean ,
travelMode:
{
Description: Specifies the routing profile for snapping the points. If unspecified, the default mode is "driving", which optimizes the snapped points for driving routes. ,
Enum:
{
driving: The points are snapped to the road suitable for cars. ,
walking: The points are snapped to the pedestrian route including the use of sidewalks. ,
}
,
Required: False ,
}
enum ,
}
,
}

⚐ Response (200)

{
type:
{
Description: Specifies the `GeoJSON` type. The only supported object type is `FeatureCollection`. For more information, see [RFC 7946](https://www.rfc-editor.org/rfc/rfc7946). ,
Enum:
{
FeatureCollection: Specifies the `GeoJSON` `FeatureCollection` object type. ,
}
,
Required: False ,
}
enum ,
features:
{
Description: `GeoJSON` feature object that contains Geometry object and additional properties. Refer to [RFC 7946, Section 3.2](https://www.rfc-editor.org/rfc/rfc7946#section-3.2) for details. ,
Required: False ,
}
[
object ,
]
,
}

⚐ Response (default)

{
$headers:
{
x-ms-error-code:
{
Description: Error code of the error that occurred. ,
}
string ,
}
,
$schema:
{
Description: Common error response for Azure Maps APIs to return error details for failed operations. ,
}
{
error:
{
Description: The error detail. ,
Required: True ,
}
{
code:
{
Description: One of a server-defined set of error codes. ,
Required: False ,
}
string ,
message:
{
Description: A human-readable representation of the error. ,
Required: False ,
}
string ,
target:
{
Description: The target of the error. ,
Required: False ,
}
string ,
details:
{
Description: An array of details about specific errors that led to this reported error. ,
Required: False ,
}
[
string ,
]
,
innererror:
{
Description: An object containing more specific information than the current object about the error. ,
Required: False ,
}
{
code:
{
Description: The error code. ,
Required: False ,
}
string ,
innererror:
{
Required: False ,
}
string ,
}
,
}
,
}
,
}
Route_PostRouteRange (updated)
Description :  The Route Range API creates a polygon that depicts the area reachable from a given location within a certain threshold based on the specified time or distance budget. A polygon boundary (or Isochrone) is returned in a counterclockwise orientation as well as the precise polygon center which was the result of the origin point. The returned polygon can be used for spatial filtering to search for features of interest within the provided Isochrone. For information about routing availability in countries/regions, see [Azure Maps routing coverage](https://learn.microsoft.com/azure/azure-maps/routing-coverage?pivots=latest).
Reference :  Link ¶

⚶ Changes

{
  "#id": "Route_PostRouteRange",
  "Description": {
    "new": "The Route Range API creates a polygon that depicts the area reachable from a given location within a certain threshold based on the specified time or distance budget. A polygon boundary (or Isochrone) is returned in a counterclockwise orientation as well as the precise polygon center which was the result of the origin point.\n\nThe returned polygon can be used for spatial filtering to search for features of interest within the provided Isochrone.\n\n\n\nFor information about routing availability in countries/regions, see [Azure Maps routing coverage](https://learn.microsoft.com/azure/azure-maps/routing-coverage?pivots=latest).\n\n\n",
    "old": "The Route Range API creates a polygon that depicts the area reachable from a given location within a certain threshold based on the specified time or distance budget. A polygon boundary (or Isochrone) is returned in a counterclockwise orientation as well as the precise polygon center which was the result of the origin point.\n\nThe returned polygon can be used for spatial filtering to search for features of interest within the provided Isochrone.\n\n\n\nFor information about routing availability in countries/regions, see [Azure Maps routing coverage](https://learn.microsoft.com/azure/azure-maps/routing-coverage?pivots=route-v2).\n\n\n"
  },
  "$parameters": {
    "routeRangeRequest": {
      "$properties": {
        "properties": [
          {
            "#name": "isSimplifiedPolygon",
            "Description": {
              "new": "Use this to specify whether simplified polygons are required, reducing the number of vertices while preserving the overall shape.\n\n Currently, `isSimplifiedPolygon` only supports `true`. Support for high-definition polygons will be available soon. For more information and to try high-definition polygons, see [Post Route Range](/rest/api/maps/route/post-route-range?view=rest-maps-2024-07-01-preview&tabs=HTTP#inputrouterangeproperties) in the Route service public preview.",
              "old": "Use this to specify whether simplified polygons are required, reducing the number of vertices while preserving the overall shape. Currently, isSimplifiedPolygon only supports true. High-definition polygons are supported in version 2024-07-01-preview"
            }
          }
        ]
      }
    }
  }
}

⚼ Request

POST:  /route/range
{
api-version:
{
Description: Version number of Azure Maps API. ,
Required: True ,
}
string ,
x-ms-client-id:
{
Description: Specifies which account is intended for usage in conjunction with the Microsoft Entra ID security model. It represents a unique ID for the Azure Maps account and can be retrieved from the Azure Maps management plane Account API. To use Microsoft Entra ID security in Azure Maps see the following [articles](https://aka.ms/amauthdetails) for guidance. ,
Required: False ,
}
string ,
routeRangeRequest:
{
Description: Request body of RouteRange API in GeoJSON format. ,
Required: True ,
}
{
type:
{
Description: Specifies the `GeoJSON` type. The only supported object type is Feature. For more information, see [RFC 7946](https://www.rfc-editor.org/rfc/rfc7946). ,
Enum:
{
Feature: Specifies the `GeoJSON` Feature object type. ,
}
,
Required: True ,
}
enum ,
geometry:
{
Description: Specifies the `GeoJSON` Point Geometry object. Refer to [RFC 7946](https://www.rfc-editor.org/rfc/rfc7946) for details. ,
Required: True ,
}
object ,
properties:
{
Description: Specifies the parameters to use for the calculation of isochrone polygon. ,
Required: True ,
}
{
departAt:
{
Description: The date and time of departure from the origin point formatted as a dateTime value defined by [RFC 3339, section 5.6](https://www.rfc-editor.org/rfc/rfc3339#section-5.6). When a time zone offset is not specified, UTC will be assumed. If the `departAt` is not set, the default value is the current time. Example: "departAt": "2023-06-01T09:30:00.000-07:00" ,
Format: date-time ,
Required: False ,
}
string ,
isSimplifiedPolygon:
{
Description: Use this to specify whether simplified polygons are required, reducing the number of vertices while preserving the overall shape. Currently, `isSimplifiedPolygon` only supports `true`. Support for high-definition polygons will be available soon. For more information and to try high-definition polygons, see [Post Route Range](/rest/api/maps/route/post-route-range?view=rest-maps-2024-07-01-preview&tabs=HTTP#inputrouterangeproperties) in the Route service public preview. ,
Required: False ,
}
boolean ,
optimizeRoute:
{
Description: Specifies the parameter to use to optimize the route. If not defined, the default is "fastestWithoutTraffic" which returns the route to minimize the travel time without using current traffic information. Example: "optimizeRoute":"shortest" ,
Enum:
{
shortest: The route is calculated to minimize the distance. Traffic information is not used. ,
fastestWithoutTraffic: Finds the fastest route, without factoring in traffic information. ,
fastestWithTraffic: The route is calculated to minimize the time using current traffic information. `Note`: Only supported for driving and truck travelMode. ,
}
,
Required: False ,
}
enum ,
avoid:
{
Description: Specifies restrictions that the route calculation should honor when determining the reachable locations. Avoid supports multiple values in a request. Example: "avoid": ["limitedAccessHighways", "tollRoads"] ,
Required: False ,
}
[
string ,
]
,
vehicleSpec:
{
Description: Specifies the vehicle attributes such as vehicle height, weight, max speed, type of cargo, etc. to consider when calculating the reachable locations. This helps avoid low bridge clearances, road restrictions, difficult right turns to provide the optimized truck route based on the vehicle specifications. Vehicle attributes are specified within the vehicleSpec property. ,
Required: False ,
}
object ,
distanceBudgetInMeters:
{
Description: The distance budget specifies the maximum range in meters which can be traveled from the origin waypoint. It cannot be set when `timeBudgetInSec` is specified. The maximum distance supported is 500,000 meters. Example: "distanceBudgetInMeters":5000 ,
Format: float ,
Required: False ,
}
number ,
timeBudgetInSec:
{
Description: The time budget specifies the maximum time in seconds available for travel, defining how far one can go within this time constraint from the origin waypoint. It cannot be set when `distanceBudgetInMeters` is specified. The maximum time supported is 21,600 seconds. Example: "timeBudgetInSec":3600 ,
Format: float ,
Required: False ,
}
number ,
travelMode:
{
Description: Specifies the travel profile to consider when calculating the range polygon. If not specified, the default value is "driving". Example: "travelMode":"driving" ,
Enum:
{
driving: Routing profile suitable for cars are used for range polygon calculation. ,
truck: Routing profile suitable for commercial vehicles like trucks are used for range polygon calculation. ,
}
,
Required: False ,
}
enum ,
}
,
}
,
}

⚐ Response (200)

{
type:
{
Description: Specifies the `GeoJSON` type. The only supported object type is `FeatureCollection`. For more information, see [RFC 7946](https://www.rfc-editor.org/rfc/rfc7946). ,
Enum:
{
FeatureCollection: Specifies the `GeoJSON` `FeatureCollection` object type. ,
}
,
Required: False ,
}
enum ,
features:
{
Description: `GeoJSON` feature object that contains Geometry object and additional properties. Refer to [RFC 7946, Section 3.2](https://www.rfc-editor.org/rfc/rfc7946#section-3.2) for details. ,
Required: False ,
}
[
object ,
]
,
}

⚐ Response (default)

{
$headers:
{
x-ms-error-code:
{
Description: Error code of the error that occurred. ,
}
string ,
}
,
$schema:
{
Description: Common error response for Azure Maps APIs to return error details for failed operations. ,
}
{
error:
{
Description: The error detail. ,
Required: True ,
}
{
code:
{
Description: One of a server-defined set of error codes. ,
Required: False ,
}
string ,
message:
{
Description: A human-readable representation of the error. ,
Required: False ,
}
string ,
target:
{
Description: The target of the error. ,
Required: False ,
}
string ,
details:
{
Description: An array of details about specific errors that led to this reported error. ,
Required: False ,
}
[
string ,
]
,
innererror:
{
Description: An object containing more specific information than the current object about the error. ,
Required: False ,
}
{
code:
{
Description: The error code. ,
Required: False ,
}
string ,
innererror:
{
Required: False ,
}
string ,
}
,
}
,
}
,
}